量子垒生长速率对InGaN基绿光LED性能的影响

利用MOCVD技术在图形化Si(111)衬底上生长了InGaN/GaN绿光LED外延材料。在GaN量子垒的生长过程中,保持NH3流量不变,通过调节三乙基镓(TEGa)源的流量来改变垒生长速率,研究了量子垒生长速率对LED性能的影响。使用二次离子质谱仪(SIMS)和荧光显微镜(FLM)分别对量子阱的阱垒界面及晶体质量进行了表征,使用电致发光测试系统对LED光电性能进行了表征。实验结果表明,垒慢速生长,在整个测试电流密度范围内,外量子效率(EQE)明显提升。我们认为,小电流密度下,EQE的提升归结为量子阱晶体质量的改善;而大电流密度下,EQE的提升则归结为阱垒界面陡峭程度的提升。     

金属Al背电极二维AZO光栅的制备和陷光特性

研究了背电极金属Al膜上二维ZnO:Al光栅的制备及其反射光谱特性.在厚度为300 nm的Al膜上溅射80 nm ZnO:Al薄膜,旋涂AZ5206光刻胶,用波长为325 nm的激光进行光刻制作光栅掩模.采用溶脱-剥离法在Al衬底上制备周期(624~1250 nm)和槽深(100~300 nm)可独立调控的ZnO:Al二维光栅.表面形貌采用原子力显微镜和扫描电镜观察,反射光谱用带积分球的分光光度计测试,双向反射分布函数用散射仪测量.结果表明,300 nm Al膜上织构二维ZnO:Al光栅背电极结构,当光栅槽深为228 nm,周期从624 nm增加到986 nm时,背电极总反射率、漫反射率以及雾度均随光栅周期增大而显著增加,而当周期从986 nm增加到1250 nm时,总反射率、漫反射率以及雾度略有增加.双向反射分布函数测试结果进一步证实了上述实验结果,即随着周期增大,漫反射峰值越大,衍射峰个数也增多.提示背反电极上槽深为228 nm、周期为986 nm的二维ZnO:Al光栅具有较好的散射效果,其中漫反射占总反射的百分比为45%.     

Ce∶LuAG闪烁晶体的生长研究

Ce∶LuAG晶体是一种性能优良的闪烁材料,但采用提拉法生长Ce∶LuAG时,经常出现开裂和包裹物缺陷。本文通过理论与实践相结合的方式分析了温度梯度、提拉速度、晶体旋转速度和热应变等因素对晶体产生缺陷的影响,并提出了解决办法,给出了适合生长优质Ce∶LuAG晶体的工艺参数:熔体上方温度梯度在5 ℃/mm左右,放肩角度在30°~60°,提拉速度1.0~1.5 mm/h,晶体旋转速度15~25 r/min。最后成功生长出直径30 mm、等径长50 mm质量较为完好的Ce∶LuAG单晶,晶体内核心面积小。     

茜素红-铽光谱探针共振瑞利散射法测定加替沙星

提出了共振瑞利散射光谱法测定人体血浆,尿样中加替沙星含量的方法。在p H5.5~6.5的HAc-Na Ac缓冲溶液中,加替沙星(Gatifloxacin,GTFX)与Tb(Ⅲ)反应形成的二元螯合物共振瑞利散射(Resonance Rayleigh Scattering,RRS)强度极弱,但当其进一步与酸性染料茜素红反应形成三元离子缔合物时,RRS显著增强,其最大散射波长分别位于373 nm和605nm处。在373 nm处,方法的线性范围和检出限分别为0~5.26μg·m L-1和7.5 ng·m L-1。本法简便、快速,并具有良好的选择性,用于片剂,人尿液和血浆中加替沙星含量的测定,其回收率在96.1~104.5%。     

“海水提镁”项目式教学设计与实践*

依托广西北海市丰富的海洋资源,创设了“在北海能否建提镁厂”的驱动性总任务,师生合议将任务规划为3个大问题和6个子任务。学生采用信息收集、分类、比较、推理、实验、系统分析等认知策略,最终以ppt的形式进行成果汇报,通过组间评价、核心问题讨论、决策性问题辩论等方式逐步落实项目目标。     

二维配位聚合物[Tb(1,4⁃bdc)1.5(phen)(H2O)]n的合成、晶体结构及对Fe3+离子的荧光检测

通过溶剂热反应成功合成出一种新型2D配位聚合物[Tb(1,4-bdc)_1.5(phen)(H₂O)]_n(1)(1,4-H₂bdc=对苯二甲酸;phen=菲咯啉)。对其进行了单晶X射线衍射、粉末X射线衍射、红外光谱、元素分析、荧光光谱表征。X射线衍射晶体学分析表明,配合物1结晶于三斜晶系P1空间群,2个相邻的Tb(Ⅲ)离子与4个1,4-bdc^2-通过—O—C—O—桥联成双核单元,并进一步通过1,4-bdc^2-桥联成二维层状结构。荧光实验证明配合物1可以通过荧光猝灭机制检测Fe₃₊,Ksv=8.39×10³ L·mol-1,检测限为0.017μmol·L^-1。     

多羧基小分子化合物诱导阳离子囊泡聚集的研究

研究了由阳离子型肽脂质溴化N,N-二-十六烷基-Na-6-三甲胺基己酰基-L-丙氨酰胺(N+C5Ala2C16)形成的阳离子囊泡,在加入含羧基小分子化合物后形成的聚集。考察了乙二胺四乙酸(EDTA)加入到囊泡中后吸光值随时间的变化。结果表明:当EDTA增加到一定浓度时可以引起由阳离子囊泡的聚集;在加入Ca2+后,阳离子囊泡聚集体得到分散;借助电子显微镜观察到了囊泡的聚集和分散。超滤后,用高效液相色谱法确定了囊泡结合的EDTA量。考察了不同pH条件下EDTA对囊泡聚集的影响,当EDTA等含多羧基小分子化合物羧基解离数为三个或以上时能够引起囊泡的聚集,而少于三个时囊泡不能发生聚集。     

石墨烯基复合材料应用于光电二氧化碳还原的基本原理，研究进展和发展前景

In response to aggravated fossil resources consuming and greenhouse effect, CO₂ reduction has become a globally important scientific issue because this method can be used to produce value-added feedstock for application in alternative energy supply. Photoelectrocatalysis, achieved by combining optical energy and external electrical bias, is a feasible and promising system for CO₂ reduction. In particular, applying graphene in tuning photoelectrochemical CO₂ reduction has aroused considerable attention because graphene is advantageous for enhancing CO₂ adsorption, facilitating electrons transfer, and thus optimizing the performance of graphene-based composite electrodes. In this review, we elaborate the fundamental principle, basic preparation methods, and recent progress in developing a variety of graphene-based composite electrodes for photoelectrochemical reduction of CO₂ into solar fuels and chemicals. We also present a perspective on the opportunities and challenges for future research in this booming area and highlight the potential evolution strategies for advancing the research on photoelectrochemical CO₂ reduction.     

InGaN/GaN多量子阱LED载流子泄漏与温度关系研究

通过测量光电流,直接观察了InGaN/GaN量子阱中载流子的泄漏程度随温度升高的变化关系。当LED温度从300K升高到360K时,在相同的光照强度下,LED的光电流增大,说明在温度上升之后,载流子从量子阱中逃逸的数目更多,即载流子泄漏比例增大。同时,光电流的增大在激发密度较低的时候更为明显,而且光电流随温度的增加幅度与激发光子的能量有关。用量子阱-量子点复合模型能很好地解释所观察到的实验现象。实验结果直接证明,随着温度的升高,InGaN/GaN量子阱中的载流子泄漏将显著增加,而且在低激发密度下这一效应更为明显。温度升高导致的载流子泄漏增多是InGaN多量子阱LED发光效率随温度升高而降低的重要原因。     

Three Zinc(Ⅱ) Complexes Based on 2-Carboxylic Acid-4-nitropyridine-1-oxide: Synthesis,Crystal Structure,and Fluorescence Properties

Three new metal-organic complexes, namely [Zn(POA)2(H2O)2](1), [Zn(POA)2(H2O)2]·2H2O(2) and [Zn(POA)2]n(3), have been synthesized by organic ligand 2-carboxylic acid-4-nitropyridine-1-oxide(POA) and zinc(Ⅱ) ions. The structures of complexes 1~3 are characterized by single-crystal X-ray analysis, XRD powder diffraction analysis, infrared spectroscopy and thermal stability analysis method. Complex 1 belongs to monoclinic system, space group C2/c with a = 22.8215(15), b = 7.5613(16), c = 10.048(3) ?, β = 109.47°, V = 1634.7(6) ?~3, Z = 4, F(000) = 944, Dc = 1.900 g/cm^3, C(12)H(10)N4O(12)Zn, Mr = 467.61 and μ = 1.584 mm^-1. The whole molecule presents "V" shape. Complex 2 is a centrosymmetric structure in triclinic system with space group P1: a = 7.4728(5), b = 7.6825(6), c = 8.5184(6) ?, α = 65.975(2), β = 79.87(2), γ = 89.855(2)°, V = 4384.1(5) ?~3, Z = 1, F(000) = 256, Dc = 1.908 g/cm^3, C(12)H(14)N4O(14)Zn, Mr = 503.64 and μ = 1.492 mm^-1. Complex 3 is a one-dimensional chain structure belonging to monoclinic system and space group P21/c with a = 4.9456(6), b = 12.5322(14), c = 11.2514(13) ?, β = 97.313(11)°, V = 6916.8(14) ?~3, Z = 2, F(000) = 432, Dc = 2.072 g/cm^3, C(12)H6N4O(10)Zn, Mr = 431.58, and μ = 1.852 mm^-1. In three complexes, six oxygen atoms from the surrounding coordination atoms form a ZnO6 distorted octahedral coordination geometry around the zinc ions. Meanwhile, fluorescent properties of the three complexes were investigated at room temperature. The fluorescence spectroscopic analysis demonstrated that the ligand POA shows red-shift after coordinating with the zinc(Ⅱ) ions.